Innokin Adept Mod is certified dustproof, shockproof and IP67 waterproof. Powered by a built-in 3000mAh battery, it will automatically choose the best wattage setting according to different coil resistances. If the coil in atomizer has a 1.0ohm or higher resistance, the setting will be 11W, 12W, 13W or 14W. With sub ohm atomizers, the options are 14W, 15W, 16W or 17W. There is only the one adjustment button, and the screen above it will display between 1-4 bright bars depending on your desired wattage setting.
Charging the device takes around 1 hour thanks to its fast 2A charging capacity. But you won't be charging this very often, especially when using the higher resistance coils. For safety, there are a plethora of safety features such as over-discharge, overcharge, high voltage, short circuit, overheat, over-puff and high resistance protections. Anyway, the Adept Mod is an excellent setup for both inside and outdoor vaping.
Where to buy: https://vapesourcing.com/innokin-adept-mod.html
Parameters
Dimensions: 130 * 43.5 * 30mm
Battery: Internal 3000mAh
Cut off time: 10sec
Resistance Range: 0.4-3.0ohm
Charging Current: 5V 2A
Maximum Voltage: Max 5.5V
You may also like: smok rpm near me