Hugsvape Surge Squonk 80W Starter Kit vs Vandy Vape Pulse X Squonk Kit
Publicado: 29 Sep 2018, 05:40
Hugsvape Surge Squonk 80W Starter Kit vs Vandy Vape Pulse X Squonk Kit, Which is Better？
Hugsvape Surge Squonk 80W Starter Kit
Hugsvape Surge Squonk 80W Kit combines Surge Squonk Mod with Piper RDA. The Surge Squonk Mod is powered by a single 18650 or 20700 battery and is capable 80W max output. It equips a large OLED screen to display parameters clearly. Various modes can be switchable and multiple protections make sure the safety. The panel adopts magnetic design for easy removing and installing. 6ml e-juice bottle is included. Piper RDA features dual vertical coil system. Its bottom airflow transfers to side airflow through the tube and then hits the coils directly from inside. Both 510 pin and Squonk pin are available.
Parameters:
Surge Squonk Mod
Material: PC+ Glass Fiber
Size: 79x 54.4x 25.7mm
Wattage range: 7- 80W
TC range: 100- 315℃/ 200- 600℉
Standby currently ≤20uA
Maximum output voltage: 9V
6.0ml food grade silicon bottle
Piper RDA
Size: 24x 27.8mm
With both 510 pin and BF pin
Click to check more detail about Hugsvape Surge Squonk 80W Starter Kit
Vandy Vape Pulse X Squonk Kit
The Vandy Vape Pulse X BF Kit is another collaboration between Vandy Vape and Tony B. The Vandy Vape Pulse X Mod has maximum power output of 90 watts with single 18650 / 20700 / 21700 battery (NOT INCLUDED). It is powered by Vandy Chip, which has excellent quality and highest stability. The Pulse X RDA feeds the juice directly to the top of your coils, giving you the experience you would get with typical dripping atomizers, and saturating your wicks and coils from the top. The "X" design for the post can be used effectively for vertical and horizontal builds, and can accommodate large or small coils. Keep up with the latest in rebuildables and get your Pulse X BF Squonk Kit by Vandy Vape and Tony B today.
Features
Dimensions: 27 x 54.8 x 82.6mm (D x W x H)
Construction: Nylon, Heat-Resistant ABS
Powered By Vandy Chipset
Output Mode: VT-Ti / VT-Ni / VT-SS / VW / VV / Bypass
Output Wattage: 5 - 90W
Output Voltage: 0.5 - 8.5V
Resistance Range (TC): 0.05 - 1.5 ohm
Resistance Range (VW): 0.05 - 3.0 ohm
510 Threading
Spring Loaded 510 Connector Pin
Temperature Range: 200 - 600°F (100 - 315°C)
OLED Display Screen
Battery: 1 x 18650 / 20700 / 21700 (Not Included)
Replaceable Magnetic Panels
Atomizer Capacity: 2ml
Squonk Bottle Capacity: 8ml
Top and Bottom Refill Support
Airflow: Side Adjustable
Safety Features: Overheat Protection / Open Circuit Protection / Short Circuit Protection / Overcurrent Protection / Overtime Protection / Low-Battery Warning
Order Vandy Vape Pulse X Squonk Kit Now!
Here is the difference between Pulse X and Hugsvape Surge Squonk Kit:
Click to see more vape deals in https://www.vaporl.com/vaporl-daily-flash-sale
Hugsvape Surge Squonk 80W Starter Kit
Hugsvape Surge Squonk 80W Kit combines Surge Squonk Mod with Piper RDA. The Surge Squonk Mod is powered by a single 18650 or 20700 battery and is capable 80W max output. It equips a large OLED screen to display parameters clearly. Various modes can be switchable and multiple protections make sure the safety. The panel adopts magnetic design for easy removing and installing. 6ml e-juice bottle is included. Piper RDA features dual vertical coil system. Its bottom airflow transfers to side airflow through the tube and then hits the coils directly from inside. Both 510 pin and Squonk pin are available.
Parameters:
Surge Squonk Mod
Material: PC+ Glass Fiber
Size: 79x 54.4x 25.7mm
Wattage range: 7- 80W
TC range: 100- 315℃/ 200- 600℉
Standby currently ≤20uA
Maximum output voltage: 9V
6.0ml food grade silicon bottle
Piper RDA
Size: 24x 27.8mm
With both 510 pin and BF pin
Click to check more detail about Hugsvape Surge Squonk 80W Starter Kit
Vandy Vape Pulse X Squonk Kit
The Vandy Vape Pulse X BF Kit is another collaboration between Vandy Vape and Tony B. The Vandy Vape Pulse X Mod has maximum power output of 90 watts with single 18650 / 20700 / 21700 battery (NOT INCLUDED). It is powered by Vandy Chip, which has excellent quality and highest stability. The Pulse X RDA feeds the juice directly to the top of your coils, giving you the experience you would get with typical dripping atomizers, and saturating your wicks and coils from the top. The "X" design for the post can be used effectively for vertical and horizontal builds, and can accommodate large or small coils. Keep up with the latest in rebuildables and get your Pulse X BF Squonk Kit by Vandy Vape and Tony B today.
Features
Dimensions: 27 x 54.8 x 82.6mm (D x W x H)
Construction: Nylon, Heat-Resistant ABS
Powered By Vandy Chipset
Output Mode: VT-Ti / VT-Ni / VT-SS / VW / VV / Bypass
Output Wattage: 5 - 90W
Output Voltage: 0.5 - 8.5V
Resistance Range (TC): 0.05 - 1.5 ohm
Resistance Range (VW): 0.05 - 3.0 ohm
510 Threading
Spring Loaded 510 Connector Pin
Temperature Range: 200 - 600°F (100 - 315°C)
OLED Display Screen
Battery: 1 x 18650 / 20700 / 21700 (Not Included)
Replaceable Magnetic Panels
Atomizer Capacity: 2ml
Squonk Bottle Capacity: 8ml
Top and Bottom Refill Support
Airflow: Side Adjustable
Safety Features: Overheat Protection / Open Circuit Protection / Short Circuit Protection / Overcurrent Protection / Overtime Protection / Low-Battery Warning
Order Vandy Vape Pulse X Squonk Kit Now!
Here is the difference between Pulse X and Hugsvape Surge Squonk Kit:
Click to see more vape deals in https://www.vaporl.com/vaporl-daily-flash-sale