Eleaf iStick Tria with ELLO S Starter Kit
The Eleaf Tria 300W TC Starter Kit is a powerful triple 18650 powered box mod paired with the Eleaf Ello 25mm Sub-Ohm Tank. The iStick Tria features a three piece body design, a 300W chipset with full TC support, and fits atomizers up to 25mm in diameter. The iStick Tria Box Mod is housed on the bottom of the device through a latch door, allowing for an easy to swap method. The Tria can also be charged via USB through 2A charging, utilizing the battery balancing trickle charge system in which the Tria will equalize level charge and also secure better charging. The Ello 25mm Sub-Ohm Tank features an expandable tank section, allowing users to use the compact size for 2ml capacity or the extended size for 4ml capacity; a sliding top fill system; two different drip tips; and uses the HW series coils. The iStick Tria 300W TC Starter Kit, with its powerful and convenient design, convenient retractable top fill Ello 25mm Sub-Ohm Tank, and upgradable firmware, makes this kit a great choice for all vapers.
Eleaf iStick Tria Parameters:
Size: 41mm*41mm*114mm
Output wattage: 1-300W
E-liquid capacity: 2ml (Extendable to 4ml)
Maximum charging current: 2A
Maximum output current: 50A
Thread type: 510 thread
Battery type: high-rate 18650 battery
(Continuous discharge current should be above 25A)
Output mode: VW/TC(Ni,Ti,SS,TCR-M1,M2,M3)
Resistance range: 0.05-1.5ohm (TC modes)
0.1-3.5ohm (VW mode)
Temperature range: 100－315℃/200－600℉(TC modes)
Click to see more about Eleaf iStick Tria 300W Starter Kit
Wismec Reuleaux RXGen3 Starter Kit
Wismec introduces the Reuleaux GEN3 300W Starter Kit, the third generation of Reuleaux mods that is smaller, lighter, more ergonomic than previous versions, and includes the new GNOME Sub-Ohm Tank. The Reuleaux RXGEN3 Kit is capable of running up to 300W and has a full temperature control suite. A 1.3 inch OLED screen displays essential information to the user and a three button control face makes it easy to use. The Reuleaux GEN3 now features a slide and lock battery access door that accepts three high amperage 18650 batteries and has a maximum of 2A charging via a micro USB charge port.
The new GNOME Sub-Ohm Tank, a 25mm, retractable sliding top fill tank, capable of holding up to 4ml of E-Juice. The GNOME Sub-Ohm Tank utilizes the Wismec WM Coil Family and includes a WM2 0.15 ohm coil and a WM3 0.2 ohm coil, capable of running 30 to 70W and 40 to 130W respectively. The GNOME Sub-Ohm Tank features a uniquely implemented, stealth dual bottom airflow control that is fully closeable and two proprietary drip tips--ULTEM and delrin.
Wismec RX Gen 3 Starter Kit Parameter:
Size: 39.3*48.8*113.7mm
Weight: 197.7g
Thread Type: 510 spring loaded connector
Cell Type: high-rate 18650 cell (discharging current should be above 25A)
Output Mode: VW/TC-Ni/TC-Ti/TC-SS/TCR mode
Output Wattage: 1-300W
Resistance Range: 0.05-1.5ohm for TC modes
0.1-3.5ohm for VW mode
Temperature Range: 100-315°C/200-600°F (TC modes)
Maximum Charging Current: 2A
Maximum Output Current: 50A
Output Voltage Range: 0.5-9V
Shop WISMEC RX GEN3 TC Box Mod Now!